2014-03-28 10.51.59
Fluval EDGE DIY LED Upgrade Kits
We are now offering Fluval Edge LED Upgrade kits.  These kits are perfectly designed for your fluval edge aquarium.  All of our kits are dimmable and almost all of the work is done for you.  These are by far some of the most affordable easy to install kits on the market.  We have been custom designing kits for years now and have time tested results!
!

Fluval EDGE 6 Gallon DIY LED 24w Upgrade Retro Fit Kit

!

With this kit you get 2 easy install bars.  This kit is to be used with the existing stock lighting if yours still works.  These bars are prewired and come with plug and play connectors.  You will have to crimp the dimmer cord after you wire it in the location you would like.  These bars have splash guards to help protect against the splashing the filter causes in the back.  With our high power 3w bridgelux LED's you will be able to keep almost any coral you would like in your tank.

What this kit comes with.

  • 2x Heatsink bars with 4 leds each for a total of 24w
  • Dimmable Driver with knob dimmer to control intensity of lighting. 
  • 2 Straps to mount these lights to the existing lighting. 
  • This kit comes with everything needed to install and run lights. 

Fluval EDGE 6 Gallon Heatsink 24w LED DIY Retro Fit Kit

!

With this kit you get 1 easy install heatsink.  This kit is made to be used if your existing lighting does not work.  This is to be mounted to the metal mesh on the top and existing lighting will need to be removed.  This led heatsink is prewired and comes with plug and play connectors.  You will have to crimp the dimmer cord after you wire it in the location you would like.  You can add on an acrylic splash guard to help with splashing and we also have fan kits to help with heat on all of our Fluval EDGE Kits.  With our high power 3w bridgelux LED's you will be able to keep almost any coral you would like in your tank.

What this kit comes with.

  • 1x Heatsink with 8 leds each for a total of 24w
  • Dimmable Driver with knob dimmer to control intensity of lighting. 
  • 2 sets of bolts to mount these to your mesh top.
  • This kit comes with everything needed to install and run lights. 

Meanwell Driver ELN-60-48p Upgrade for Fluval Edge LED Kits

!
This driver will replace the other dimmable driver included.  These drivers require more wiring expertise and are made to be used with Marine Controllers.  This drivers use PWM dimming technology.  Make sure your controller uses this technology before purchase.

Fluval Edge 6 gallon acrylic splash guard

!
This is an acrylic splash guard to be used to protect LED's on your Fluval EDGE 6 gallon.  This splash guard rests over the opening on the top.

Fluval EDGE 6 Gallon Fan Kit

!

This is a fan kit to mount on the mesh guard on your Fluval EDGE tank.  The fan will keep temperatures of LED's down and improve life. 

This kit comes with.

  • Fan
  • 4 bolts and nuts to mount to mesh
  • 1 12v power supply to power fan
  • 2 water resistant wire connectors to wire fan