wp_20130606_005
Current Biocube DIY Retro Fit LED Kits

These kits are for the new models of the Biocube.  These kits will allow you to keep the stock switches and stock night light led lights.

LED kits for nearly every nano cube on the market.

We have carefully chosen our LED spectrum to maximize photosynthesis in corals at the 400-500nm spectrum.  We mix our blue leds with a 440-460nm Super Blue and a 460-475nm Blue.   This mix insures you are targeting a larger photosynthetic spectrum which corals need!  We also use a pure white bulb which targets a broader range of photosynthetic spectrum!  These bridgelux 3w bulbs are welded to starboards to help dissipate heat.  The wires are measured and soldered onto the LED's so all you need to do is remove the old lighting and mount the new led strips onto the existing reflectors.  These have been tested for hours on the current aluminum housings in these tanks!  These will also still allow you to use your stock fans and stock night lighting!

These lights do not replace your hood, but mount in your hood.  This allows you to keep a clean stock look to the tank.  

!

36w Retro Fit DIY LED Upgrade Kit for Current Biocube 14 Gallon

!

What you will get! This kit will let you dim blue/white together.

  • 12 leds(6 white and 6 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1/8" aluminum heat sinks
  • Thermal tape to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Online Instructions

58w Retro Fit DIY LED Upgrade Kit for Current Biocube 14 Gallon

!

What you will get! This kit will let you dim blue/white together.

  • 18 leds(9 white and 9 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1 1/4" tube aluminum heat sinks
  • Thermal Epoxy to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Online Instructions

58w Retro Fit DIY LED Upgrade Kit for Current Biocube 14 Gallon

!

What you will get!  This kit will let you dim blue/white separately.

  • 18 leds(9 white and 9 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1 1 1/4" tube aluminum heat sinks
  • Thermal epoxy to easily mount these in your stock hood
  • 2xDimmable Ballast/Driver
  • 2xDimmer
  • Online Instructions

36w Retro Fit DIY LED Upgrade Kit for Current Biocube 29 Gallon

!

What you will get! This kit will let you dim blue/white together.

  • 12 leds(6 white and 6 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1/8" aluminum heat sinks
  • Thermal tape to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Online Instructions

58w Retro Fit DIY LED Upgrade Kit for Current Biocube 29 Gallon

!

What you will get! This kit will let you dim blue/white together.

  • 18 leds(9 white and 9 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1 1/4" tube aluminum heat sinks
  • Thermal Epoxy to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Online Instructions

60w Retro Fit DIY LED Upgrade Kit for Current Biocube 29 Gallon

!

What you will get!  This kit will let you dim blue/white separately.

  • 20 leds(10 white and 10 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1 1 1/4" tube aluminum heat sinks
  • Thermal epoxy to easily mount these in your stock hood
  • 2xDimmable Ballast/Driver
  • 2xDimmer
  • Online Instructions

Installation Pictures for Current Biocube 14

!
Click on the picture to the left for installation pictures.

Installation pictures for Current Biocube 29 Gallon

!
Click on the pictures for a walkthrough on installation.