Oceanic Biocube DIY Retro Fit LED Kits

LED kits for nearly every nano cube on the market.

We have carefully chosen our LED spectrum to maximize photosynthesis in corals at the 400-500nm spectrum.  We mix our blue leds with a 440-460nm Super Blue and a 460-475nm Blue.   This mix insures you are targeting a larger photosynthetic spectrum which corals need!  We also use a pure white bulb which targets a broader range of photosynthetic spectrum!  These bridgelux 3w bulbs are welded to starboards to help dissipate heat.  The wires are measured and soldered onto the LED's so all you need to do is remove the old lighting and mount the new led strips onto the existing reflectors.  These have been tested for hours on the current aluminum housings in these tanks!  These will also still allow you to use your stock fans and stock night lighting!

These lights do not replace your hood, but mount in your hood.  This allows you to keep a clean stock look to the tank.  

!

Biocube 8 Gallon Led Kit 15 Watt

!

What you will get!

  • 5 leds(3 white and 2 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1/8" aluminum heat sinks
  • Thermal tape to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Instructions  

Biocube 8 Gallon LED Kit 24 Watt

!
  • 8 leds(4 white and 4 blue)(You must specify if you would like pure white or full spectrum whites in payment. If nothing is specified I build the kits with full spectrum whites) mounted on easy mount 1/8" aluminum heat sinks
  • Thermal tape to easily mount these in your stock hood
  • 1xDimmable Ballast/Driver
  • 1xDimmer
  • Instructions  

Biocube 14 Gallon LED Kit 45 Watt

!
  • Now offering some of the easiest to install and best kits on the market!
  • This kit will let you keep almost all corals including lps, zoas, and some sps.
  • All of our kits are presoldered and easy to install!
  • All of our kits are dimmable!
  • What is in included:
  • 3 Solar Flare LED Light bars(picture is of 60w 4 bar kit)
  • 8 Pure White LED's
  • 7 Royal Blue LED's
  • 1 Dimmable driver with power cord and dimmer prewired
  • Wire and quick wire clips to run into hood for mounting LED's to drivers
  • Square aluminum heatsink predrilled for existing hood
  • Bolts to mount new heatsink to hood
  • 12v power supply to power fans
  • Water resistant wire connectors
  • Instructions

Biocube 14 Gallon LED Kit 60 Watt

!
2 Drivers to Control Blue and White Separately
  • Now offering some of the easiest to install and best kits on the market!
  • This kit will let you keep almost all corals including sps and most clams!
  • All of our kits are presoldered and easy to install!
  • All of our kits are dimmable!
  • What is in included:
  • 4 Solar Flare LED Light bars
  • 10 Pure White LED's
  • 10 Royal Blue LED's
  • 2 Dimmable driver with power cord and dimmer prewired
  • Wire and quick wire clips to run into hood for mounting LED's to drivers
  • Square aluminum heatsink predrilled for existing hood
  • Bolts to mount new heatsink to hood
  • 12v power supply to power fans
  • Water resistant wire connectors
  • Instructions

Biocube 29 Gallon LED Kit 45 Watt

!
  • Now offering one of the most affordable easiest to install kits available!
  • This kit will let you keep most corals including lps, zoas, and some sps!
  • All of our kits are dimmable!
  • What you get
  • 3 Solar Flare LED Bars(picture has 60w 4 bar kit)
  • 8 Pure White LED's
  • 7 Royal Blue LED's
  • 1 Dimmable driver with power cord and dimmer prewired
  • Wire and quick wire clips to run into hood for mounting LED's to drivers
  • Square aluminum heatsink predrilled for existing hood
  • Bolts to mount new heatsink to hood
  • 12v power supply to power fans
  • Water resistant wire connectors
  • Instructions

Biocube 29 Gallon LED Kit 60 Watt

!
2 Drivers to dim and control Blue and White Separately.
  • Now offering some of the easiest to install and best kits on the market!
  • All of our kits are presoldered and easy to install!
  • All of our kits are dimmable!
  • What is in included:
  • 4 Solar Flare LED Light bars
  • 10 Pure White LED's
  • 10 Royal Blue LED's
  • 2 Dimmable driver with power cord and dimmer prewired
  • Wire and quick wire clips to run into hood for mounting LED's to drivers
  • Square aluminum heatsink predrilled for existing hood
  • Bolts to mount new heatsink to hood
  • 12v power supply to power fans
  • Water resistant wire connectors
  • Instructions

Oceanic BC29 Heatsink Pre Drilled

!
This is Pre Drilled for the stock oceanic BC 29 hood